EasyManua.ls Logo

Agria 2100 - Engine Specifications and Performance

Agria 2100
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Single-wheel power hoe 2100 13
2. Specifications
Engine
Manufacturer: ............................ agria
Type: ................................... 66/3 or 2*
Version: ....................... Fan-air-cooled
1-cylinder-2-stroke engine (petrol)
Engine lubrication: Petroil lubrication;
stoichiometric ratio 1:30
Bore: ........................................ 56 mm
Stroke: ..................................... 58 mm
Cubic capacity: ....................150 ccm
Compression: .............................. 6 :1
Output: .................................... 4.8 kW
at 4500 rpm
Spark plug: .................... Bosch M10A
Spark plug gap ...............0.5…0.6 mm
Ignition system: .................. Flywheel
magnet ignition
Contact clearance .......0.35…0.45 mm
Ignition point ............. 2.5 before u.d.c.
radio remote screened according to
VDE 0879
Starter: .......................... Recoil starter
Stop device:................. Contact break
via short circuit cable
Engine-stop-switch on handlebar
Fuel tank capacity: ....... approx. 4.5 l
Fuel: ................................. Commercial
petrol/oil mixture 1:30
octane number min. 90 RON
and self-mixing
supergrade 2-stroke engine oil, e.g.
Shell: Super T, Super TX;
Esso: Exxon Special 2T Engine oil;
BP: 2T Special
(refer to fuel recommendations)
Air filter: ....................Oil bath air filter
Engine oil filling
quantity: ........................approx. 150ml
Carburetor: .... Piston slide carburetor
Bing 1/18/31 or 1/18/106
Air control screw: ..... in basic setting
approx. 1/2…1 1/2 revs. open
Main jet: ......................................... 95
Idle jet: ........................................... 45
Needle jet: .................................. 1108
Needle setting: ................................ II
Rated speed: ...................... 4800 rpm
Top no-load speed: ............ 6300 rpm
Idling speed:....................... 1800 rpm
Operability on Slopes:
Engine is suited for use on slopes:
continuous operation possible
up to ................. 45° inclination (100%)
2

Related product manuals