44 Single-wheel power hoe 2100
Inspection and Maintenance Chart
A = Each time before you take up operation
B = After every cleaning, especially with a high-pressure cleaner
F = Maintenance should be carried out by your agria workshop
K = Checks and service to be executed by operator
P = Item in lubrication chart
W = Maintenance to be executed by professional workshop
* = After two years
25 50 100 200 400
Check safety circuit function
10 K 33
Check free play of levers
11 K K 34
Check air filter
9K 28
Clean cooling-screen
1K 30
Clean surrounding parts of exhaust
KK 30
Clean engine,
K36
Check screws and nuts
K36
Check oil level in mechanical gearbox 7 K 31
Check transmission oil level in tilling drive 6 K 32
First transmission oil change in tilling drive,
subsequent oil changes
5
K
K
32
Change oil in oil bath air filter,
earlier, if required!
9K K 28
First oil change in mechanical gearbox,
subsequent oil changes
8
W
W
31
Clean spark plug,
adjust electrode gap
3W 29
Replace spark plug
3K 29
Clean air-cooling system,
earlier, if required!
2W 30
Clean cylinder head F 29
Clean air filter completely
earlier, if required!
9W28
Check lubrication of chains for wheel
and tilling drive
4W31
Lubricate all gliding parts
12 K K 36
Replace fuel hoses
W* 29
A
Page
min.
after 3
months
min.
yearly BP
Always after operating
hours
To Next Page
Loading...
