24 Single-wheel power hoe 2100
4. Commissioning and Operation
Tilling
Starting engine
W
Check safety circuit function
- Only operate the machine if safety circuit
works!
Wear individual protective ear plugs and solid
shoes.
Pull hand clutch lever
gear shift lever (A/3)
for coarse tilling:
– select slow speed “I”
for medium tilling:
- select medium speed "II"
for fine tilling:
– select fast speed “III”
Move shift lever for tilling drive (B/19) to position
“tilling”
Slowly release hand clutch lever while pressing
the throttle – the single-wheel power hoe moves for-
ward and tilling tools start working.
W
Never leave the operator’s
position at the steering han-
dle while the machine is at work.
During all operation with the single-wheel power
hoe, especially when turning, the operator must
keep at a safe distance as defined by the steer-
ing handle.
Do not clean tilling tools with the engine run-
ning. Switch off the engine and remove spark
plug connector.
If clogging occurs, turn off the engine and clean
the attachment with an appropriate tool (wooden
stick).
4
23
A/3
B/19
To Next Page
Loading...
