AHT AC-M Operating Instructions

10.1 | Loading AHT Cooling Systems GmbH | en
36 / 458
409654_1_0120
WARNING
Damage to the electrical system and/or
the refrigerant circuit.
Contact with live parts may result in electric
shock. Flammable refrigerant can escape and
cause an explosive gas/air mixture. Fire haz-
ard due to sparking or overload.
▪ Avoid external force on the device such as
careless action with a lift truck or floor
cleaning machine.
▪ Avoid transmitting pulsations and vibrations
to the device.
▪ Observe safety notices and warnings for
appliances with flammable refrigerants
(see →Flammable refrigerants).
▪ If the appliance is damaged or the fuse is
tripped:
1. Disconnect the appliance.
2. Secure the appliance against reconnec-
tion.
3. Contact the maintenance service (see
→Maintenance services).
CAUTION
Risk of glass breakage.
Body cuts. Impact injury
▪ Do not strike glass elements with movable
objects (shopping trolleys, pallet trucks, ...).
▪ Check glass elements for damage, e.g.
cracks, breaks. In the event of damage,
promptly contact the maintenance service
(see →Maintenance services).
▪ Check for breakage of stored glass con-
tainers.
Broken glass.
Hand and body cuts.
▪ Use protective gloves to remove split glass
parts and goods that may have been dam-
aged as a result.
▪ Carefully and completely remove all split
glass parts and damaged goods.
Leakage of liquids from damaged
packaging.
Slipping hazard.
▪ Check for puddles in front of and under the
appliance.
▪ Promptly remove leaking liquids.
NOTICE
Property damage due to misuse.
▪ Do not operate the appliance above the climate
class stated on the rating plate (see →Rating plate
and serial number).
▪ The ambient temperature must not be less than 16
°C (60.8 °F).
▪ Observe the prescribed storage temperature of the
stored products.
▪ Check the Interior-temperature (see →Temperature
display).
▪ In the event of a power failure, stored goods must
be checked by the operator (temperature check).
▪ Check the area in which goods are placed for for-
eign objects. Remove goods stored incorrectly im-
mediately.
▪ Remove food residues, spilled liquids, and pack-
aging residues (see →Basic cleaning).
10.1 Loading
CAUTION
Material breakage.
Falling hazard. Impact hazard due to falling
parts/goods. Cuts.
▪ When loading, do not climb onto or into the
appliance.
Falling objects.
Impact injuries.
▪ Do not set down any objects on the appli-
ance.
▪ Observe maximum loads of any type of
storage rack (see →Technical data)
▪ Carefully add goods.
NOTICE
Property damage due to misuse.
▪ Do not load the device with goods until the temper-
ature prescribed for the product has been reached.
▪ Adhere to loading specifications.
Check the temperature on the display screen
Page31,Chapter 5.
Loading specification
– Do not add goods beyond the end of the display
shelf.
– Loading is only permitted up to the end of the re-
turn air grille.
1
Fig.8: Return air grille (1)
10.2 Shutdown and restart
WARNING
Work on the electrical system.
Contact with live parts may result in electric
shock.
▪ Only qualified staff may carry out work on
the electrical system.
Goods are removed from the front.

AHT AC-M Specifications

General

Brand	AHT
Model	AC-M
Category	Freezer
Language	English