Need help?Do you have a question about the Aim PDM 32 and is the answer not in the manual?
Information on the 35-pin AMP connectors used for input/output signals.
Specifications for the Surlok power connector for battery connection.
Specifications for the Rosenberger LVDS connector for display communication.
Configuration and ranges for analog input channels.
Configuration and modes for digital input channels.
Description of protections against over-voltage, short-circuit, and over-current.
Explanation of internal freewheeling diodes for protecting against inductive load spikes.
Understanding the role of input channels, status variables, and power outputs in PDM configuration.
Detailed setup for analog input channels, including ranges and pull-up resistors.
Configuring power outputs for continuous, PWM, or square wave output shapes.
Configuring gear shift lights and predictive time indicators on the dash.
Defining conditions for triggering alarms and associated actions like LED activation.
Information on the 35-pin AMP connectors used for input/output signals.
Specifications for the Surlok power connector for battery connection.
Specifications for the Rosenberger LVDS connector for display communication.
Configuration and ranges for analog input channels.
Configuration and modes for digital input channels.
Description of protections against over-voltage, short-circuit, and over-current.
Explanation of internal freewheeling diodes for protecting against inductive load spikes.
Understanding the role of input channels, status variables, and power outputs in PDM configuration.
Detailed setup for analog input channels, including ranges and pull-up resistors.
Configuring power outputs for continuous, PWM, or square wave output shapes.
Configuring gear shift lights and predictive time indicators on the dash.
Defining conditions for triggering alarms and associated actions like LED activation.
General| Brand | Aim |
|---|---|
| Model | PDM 32 |
| Category | Power distribution unit |
| Language | English |
To Next Page