19. Managing a track with Race Studio 3
A huge database with more than 4500 tracks, constantly updated, is available. You may transmit them to
your PDM32. Press “Tracks” icon.
Note: the GPS08 Module is needed.
The main page is divided in three columns. on the left:
• on top, the filters that allow to collect many tracks following customized criteria; by default, all
tracks are shown (light blue “All Tracks” filter in the image below).
• bottom left, the connected devices (in the image, “MXS 1.2 Strada ID 5302808”)
The column in the middle shows:
• on top a fast search bar, that allows to select the tracks which satisfy your personal research
criteria; by pressing “?”a pop-up window explains research criteria (highlighted in red below),
where:
o long name is the name you see in bold in each track box
o short name is the track name shown on the display of your MXS 1.2 Strada and is the name
you find top right of each track box
o track city is the name of the city the track is located in
• all the tracks listed in Race Studio 3 database. It automatically updates at start up if a connection to
the Internet is available.
The column on the Right shows:
• the data sheet of the selected track.
To Next Page
Loading...