17. Shift Lights and Alarms configuration
In this page you can set shift lights and set the alarm LEDs of your PDM dash, both 6” and 10”.
17.1 Shift Lights
On top you can set your dash, both 6” and 10” shift lights working mode.
Available options are:
• Shift Lights, for helping in changing gear
and
• Predictive Time, for easily understanding if the actual lap is faster or slower than the reference lap.
Use as gear Shift Lights Click the icon ( ) for setting the parameters:
You may configure:
- At which RPM the single LED turns ON
• The sequence mode of the LEDs enabling the desired option:
o a LED stays ON if its threshold is exceeded
o a LED stays ON until another LED with higher threshold turns on or
• Link the shift lights to the engaged gear enabling the related checkbox.
To Next Page
Loading...