Aiphone IX SERIES - Page 126

126
Configuring the Station
■ Begin Communication (Destination)
■ Begin Record
■ End Record
■ Recording Memory Full
■ SD Card Error
■ SIP Registration Failure
Description A SIF command is sent when a call is responded to.
Settings • Checked: Send
• Unchecked: Do not send
Default values Unchecked: Do not send
Description Sends out an SIF command when recording is started.
Settings • Checked: Send
• Unchecked: Do not send
Default values Unchecked: Do not send
Description Sends out an SIF command when recording is stopped.
Settings • Checked: Send
• Unchecked: Do not send
Default values Unchecked: Do not send
Description A SIF command will be sent when the microSD card experiences any of the following. If multiple
errors are detected in a row, a SIF command will not be sent from the second time onward.
• If
“Prevent Overwrite (→page 130)” is set to "Enable"
– When only 5% or less of the total storage space of the microSD card is free
– When the number of video and audio files saved exceeds 950
• If
“Prevent Overwrite (→page 130)” is set to "Disable"
– When 0% of the total storage space of the microSD card is free
– When the number of video and audio files saved reaches 999
Settings • Checked: Send
• Unchecked: Do not send
Default values Unchecked: Do not send
Description A SIF command is sent when a microSD card access failure is detected.
Settings • Checked: Send
• Unchecked: Do not send
Default values Unchecked: Do not send
Description A SIF command is sent when there is an error with the REGISTER request sent to the SIP
server.
Settings • Checked: Send
• Unchecked: Do not send
Default values Unchecked: Do not send