Aiphone IX SERIES - Page 92

92
Configuring the Station
4.3.1.1 Standard Mode Settings
Configure the call group number and call priority when “Call Method (→page 90)” is set to "Standard Destination".
■ Call Destination
■ Priority
4.3.1.2 Destination by Time Delay Settings
Configure the call group number to switchover, switching time, and priority when “Call Method (→page 90)” is set to
"Change Destination by Time Delay." A maximum of eight groups can be configured. Groups will be switched in order
at each configured switchover time.
■ Call Destination
■ Priority
■ Destination Dwell Time [sec]♦
Description Configure the call destination group number.
Settings 01 - 10
Default values Call Button: 01
Option Input 1-5: ―
Option Input 6: 01
Description Configure the call priority.
Settings • Normal
• Priority
• Urgent
Default values • Call Button: Normal
• Option Input 1-5: Normal
• Option Input 6: Urgent
Description Configure the number of the call group to switchover.
Settings 01 - 10
Default values —
Description Configure the call priority.
Settings • Normal
• Priority
• Urgent
Default values Normal
Description Configure the switchover time for the call destination group.
Settings 10-600sec / 1 sec step
Default values 30 sec