Aiphone IX SERIES Web Setting Manual

91
Configuring the Station
■ Ringback Tone
■ Call Timeout♦
■ Ringback Tone Count [time(s)]
Description Configure the calling tone heard from this station when an outgoing call is made.
Settings • None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select from the sound source registered in
“Custom Sound Registry (→page 85)”.
Default values Call Button: Call Pattern 1
Option Input 1: Call Pattern 2
Option Input 2: Call Pattern 3
Option Input 3: Call Pattern 4
Option Input 4: Call Pattern 5
Option Input 5: Call Pattern 6
Option Input 6: Tremolo Sound
Description Configure the call transmission time.
Settings • 10 - 600 sec: Select when setting a value from 10 to 600 sec (by 1 sec).
• Infinite: Outgoing call continues until the recipient responds.
Default values 60sec
Note
• When calling a VoIP phone, this will be the shorter time of the time set for "Call Timeout" and the call duration configured on
the IP-PBX.
Description Configure the calling tone ringtone count.
Settings • 1 - 20 times
• Infinite: The calling tone continues to play for the amount of time configured in
“Call Timeout♦
(→page 91)”.
Default values Infinite

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom