Chapter 2. Unpacking and Setting Up
This chapter describes unpacking and setting up (preparing) the ProHood capture hood and
micromanometer kit.
Unpacking
As you unpack the instrument and accessories, check the components against your packing list. If any
parts are missing or damaged, notify us immediately. Tables 1 and 2 list available standard and optional
components.
Table 1: List of Standard and Optional Components
Models PH730 and PH731 Electronic Balancing Tools (Airflow Instruments)
Carrying case, wheeled hood kit, PH731
AA-size NiMH battery, four required
Two battery holders for four AA batteries
Two static pressure probes
16 ft (4.8 m) Neoprene tubing
Operation and Service Manual
Velocity Matrix Add On Kit
Air Flow Probe - ight pitot probe
Temperature and Humidity Probe
Air Velocity and Temperature, Straight Probe
Air Velocity and Temperature, Articulating Probe
Air Velocity, Temperature, and Humidity, Straight Probe
Air Velocity, Temperature, and Humidity, Articulating Probe
Wireless Bluetooth printer
To Next Page
Loading...
Need help?
General
