38 ProHood Capture Hoods PH730/PH731
PINcode
The PINcode is a security key to be entered into the computer if prompted. The factory default
PINcode is 0000.
Note
PINcode must be set to 0000 in order to use 8934 printer.
# AutoConnects
Specifies how many times the instrument will attempt to reattach to a paired device after the power is
turned on. For this option, the instrument Discoverability setting must be enabled. Settings are 0 to 5
times.
For more information on establishing Bluetooth connections to a PC or 8934 printer, refer to
Application Note AF-150.
Applications
This menu option includes specialized measurement protocols used to perform various tests or
investigations. Applications include Heat flow, Turbulence and Log-Tchebycheff Duct Traverse. For more
information on these applications, refer to the following information:
Heat Flow: calculates heat flow by making temperature, humidity, and flow measurements upstream
and downstream of the coil in the duct. Requires thermoanemometer probe 964 or 966. See
Application Note AF-124 for more information.
Turbulence Intensity: turbulence intensity is a scale characterizing turbulence expressed as a
percent. Requires thermoanemometer probe 960, 962, 964 or 966. See Application Note AF-141 for
more information.
Log Tchebycheff (Tcheb) Duct Traverse: See below.
MENU
Pressure Tool Pitot tube
Display Setup
Flow Setup
Actual/Std Setup
Settings
Data Logging
Bluetooth Functions
Applications
Cf Selection
Calibration
APPLICATIONS
Heatflow
Turbulence
Log Tcheb Duct Traverse
To Next Page
Loading...
Need help?
General
