Chapter 3. Getting Started
This section provides information to help you quickly become familiar with the Micromanometer functions.
Keypad Functions
The keypad lets you enter information, initiate functions, and change values stored in the
micromanometer. It will be helpful before operating the micromanometer to understand what each of the
keys functions do.
Additional Messages
Pressure Tool
Selected
Battery Indicator
Activity Area
Primary
Parameter
Secondary
Parameter
MENU key
MENU
Figure 14: Keypad Functions
Press I/O to turn the meter on and off. During the power up sequence the
display will show the following: Model Number, Serial Number, and Software
Revision. To turn the instrument off, press and hold the I/O Key for 3 seconds.
The instrument will count down (OFF2, OFF1, OFF). If the AC Adapter is
attached, the Battery and I/O Key is bypassed. If the I/O Key is pressed while
adapter or press the I/O Key.
Press to scroll through choices while setting a parameter.
To Next Page
Loading...
Need help?
General
