22 ProHood Capture Hoods PH730/PH731
Table 3 identifies each Pressure Tool and the units of measure available each.
Table 3: Pressure Tool Selection and Display
in H
2
O, mm H
2
O, cm H
2
O, Pa, hPa, kPa,
mm Hg, cm Hg, in Hg,
with velocity or flow
units
Pitot Tube Velocity
Pitot Tube Flow
ft/min, m/s
l/s, m
3
/hr, m
3
/s, CFM
with velocity or flow
units
Air Flow Probe Velocity
Air Flow Probe Flow
ft/min, m/s
l/s, m
3
/hr, m
3
/s, CFM
Pressure units with K-
factor and flow units
Note
When the micromanometer is mounted on the base for use as a capture hood and the
headphone jack is connected, the unit will automatically default the Pressure Tool to Capture
Hood mode. The options when in the Pressure Tool menu will be Capture Hood or Hood
BP Mode.
MENU
Pressure Tool
Display Setup
Flow Setup
Actual/Std Setup
Settings
Data Logging
Bluetooth Functions
Applications
Cf Selection
Calibration
PRESSURE TOOL
Capture Hood
Hood BP Comp