Chapter 2: Installation
Installation Preparation
Page 7
Chapter 2: Installation
Installation Preparation
Unpack the unit carefully. A number of parts are packed loosely and will be free moving as the packaging is opened.
Before discarding the box, check the packaging carefully for any parts or documents inside. Refer to Table 4 on
page 9 for the complete list of material shipped with each unit.
Check that:
The supply voltage meets the requirements as designated:
AC part: 230 VAC±15%;
(DC Supply fan only) DC part: 36VDC~57VDC.
The shelter to be conditioned is clean on the inside, and free of excess dirt and dust.
A minimum clearance of 61 cm (24”) between supply air and any equipment/rack or other obstruction is
recommended since any interference with the airflow will adversely affect the efficiency of the machine.
Also verify that you have all of the items that the installer must provide, listed in Table 5 on page 10.
Installation and startup must be performed by an AIRSYS Authorized Service Technician (AAST).
For more information about the AAST program, please contact:
Tempest Telecom Solutions
w. http://tempesthvac.com/
ph. 805-879-5432
e. HVACSupport@tempesttelecom.com
136 W. Canon Perdido Street, Suite 100 Santa Barbara CA 93101
Danger. All the installation work must be done by a skilled professional. Installation that does not comply
with the instructions herein can result in the loss of warranty coverage. AIRSYS shall not be held liable for any
damage caused to persons or objects due to incorrect installation or incorrect operational use of the units.
Warning. All the wiring installation must comply with the local compulsory safety standards and building
codes under all circumstances.
Warning. Outdoor use. Risk of electric shock can cause injury or death: disconnect all remote electric power
supplies before servicing
When no longer in use, disposal of equipment and materials must be compliant with the local relevant laws and
standards.
Delivery
When your units are delivered, be sure to inspect them to verify that they have not been damaged during transport.
Also verify that all requested accessories listed on the purchase order have been included.
To Next Page
Loading...
