1
1. INTRODUCTION
Aksa Generator set is designed to be commissioned,
when delivered, as soon as the necessary cooling wa
-
ter, antifreeze, fuel, lubrication oil and fully charged
battery are provided.
With its long years of experience, Aksa manufactures
efficient, reliable and quality generator set.
This operating and maintenance manual is prepared
to assist the operator in operation and maintenance
of the generator set. Observing the advices and rules
in this manual will ensure that the generator set op
-
erates in maximum performance and efficiency for a
long time.
1) Care should be taken to perform more frequent
maintenance in dirty and dusty environments in order
to keep the generator set in good working condition.
2) Necessary adjustment and repairs should be made
only by authorized and qualified persons.
3) Each generator set has a model and a serial num
-
ber indicated on a label on the base frame. This plate
also indicates the manufacturing date, voltage, current,
power in kVA and kW, frequency, power factor and
weight of the generator set. These data are necessary
in spare part orders, for warranty validity and for ser
-
vice calls.
4) Make sure that recommended oil, fuel and coolant
are used.
5) Use original spare parts for engine and generator.
6) Contact AKSA authorized service in any case.
7) Take necessary precautions for safety during instal
-
lation.
8) Diesel Generating sets are produced according to
ISO 8528.
9) Open Sets are not designed for outdoor use. Open
Genset should be used under the carcass buildings or
shelters that protects from rain etc. because of inade
-
quate noise level attenuation of this structures.
Figure 1. Aksa Generator Set Dataplate
If any help is needed, Please consult AKSA Service &
Spare Parts or Authorized AKSA Service department.
1.1. Diesel Gensets and its Equipments
Diesel Gensets and their standard equipments are sent
from the factory on trucks. Open type and canopy
type Gensets equipments are mentioned below.
Open sets
• Diesel engine and alternator are mounted on the
base frame via anti vibration mounting (AVM).
• Engine mounted radiator and fan
• Base frame includes a fuel tank
• External fuel tanks for the Genset above 700 kVA
• Fuel pipes
• Batteries, battery stand and connection cables
• Industrial type exhaust silencer is sent by the Genset
Canopy sets
• Diesel engine and alternator are mounted on the
base frame via anti vibration mounting (AVM).
• Sound insulation canopy
• Engine mounted radiator and fan
• Base frame includes a fuel tank
• External fuel tanks for the Genset above 700 kVA
• Fuel pipes
• Batteries, battery stand and connection cables
• Exhaust silencers are residential type and inside the
canopy until the 825 kVA .Silencers are loose supply
by Gensets with all mounting parts above 825 kVA.
Only AP1125 exhaust system with in the canopy.
According to customer requirements, noise level at
-
To Next Page
