Akuvox C319 Administrator's Guide

C319 Series Indoor Monitor Administrator Guide
www.akuvox.com
95
Note
• The general configuration file for the in-batch provisioning is with the format
cfg taking R29 as an example, r000000000029.cfg ( 10 zeros in total while
the MAC-based configuration file for the specific device provisioning is with
the format MAC_Address of the device.cfg, for example,0C110504AE5B.cfg.
• DHCP Option 43: If the device does not get an URL from DHCP Option 66, it will
automatically use DHCP Option 43. This is done within the software and the user
does not need to specify this. To make it work, you need to configure the DHCP
server for option 43 with the update server URL in it.
19.5 Static Provisioning Configuration
You can manually set up a specific server URL for downloading the firmware or
configuration file on device web Upgrade > Advanced > Automatic Autop interface. If an
autop schedule is set up, the indoor monitor will perform the auto provisioning on a
specific timing according to autop schedule you set up. In addition,TFTP, FTP, HTTP, and
HTTPS are the protocols that can be used for upgrading the device firmware and
configuration.
Parameter Set-up:

Akuvox C319 Specifications

General

Brand	Akuvox
Model	C319
Category	Monitor
Language	English