C319 Series Indoor Monitor Administrator Guide
•
Direct IP Call Port: the direct IP Call Port is 5060 by default with the port range
from 1-65535. And you enter any values within the range other than 5060, you are
required to check if the value entered is consistent with the corresponding value on
the device you wish to establish a data transmission with.
11.2
SIP Call &SIP Call Configuration
You can make SIP call (Session Initiation Protocol) in the same way as you do for making
the IP calls on the device. However, SIP call parameters related to its account, server, and
transport type need to be configured first before you can make calls on the device.
11.3
SIP Account Registration
Akuvox C319 series indoor monitors support two SIP accounts that can all be registered
according to your applications. For example, you can switch between the two SIP
accounts. The SIP account can be configured on the device and on the device interface.
To configure the SIP account on the device Settings > Advance Settings > Account screen.
To Next Page
Loading...
Need help?
General
