C319 Series Indoor Monitor Administrator Guide
19 Auto-provisioning via Configuration File
19.1
Provisioning Principle
Auto-provisioning is a feature used to configure or upgrade devices in batch via third party
servers. DHCP, PNP, TFTP, FTP, HTTPS are the protocols used by the Akuvox intercom
devices to access the URL of the address of the third party server which stores
configuration files and firmware, which will then be used to update the firmware and the
corresponding parameters on the door phone.
Please see the flow chart below:
19.2
Introduction to the Configuration Files for Auto-Provisioning
Configuration files have two formats for auto-provisioning. One is the general
configuration files used for the general provisioning and other one is the MAC-based
configuration provisioning.
The difference between the two types of configuration files is shown below:
To Next Page
Loading...
Need help?
General
