C319 Series Indoor Monitor Administrator Guide
10 Network Setting & Other Connection
10.1
Device Network Configuration
You can check for the door phone's network connection info and configure the default
DHCP mode (Dynamic Host Configuration Protocol) and static IP connection for the
device either on the device or on the device web interface.
10.1.1
Configuring Device Network Connection on the Device
To check and configure the network connection on the device Settings > Advance Settings
screen.
Parameter Set-up:
•
DHCP: select the DHCP mode by moving the toggle switch to the right. DHCP mode
is the default network connection. If the DHCP mode is turned on, then the door
phone will be assigned by the DHCP server with IP address, subnet mask, default