C319 Series Indoor Monitor Administrator Guide
•
You can press SystemInfo
icon and then press Network tab on
the Settings screen to check device network status.
•
The default system code is 123456.
gateway, and DNS server address automatically. If you switch off the DHCP mode,
the device will be changed to static IP mode, then then the IP address, subnet mask,
default gateway, and DNS servers address have to be manually configured according
to your actual network environment.
•
IP Address: set up the IP Address if the static IP mode is selected.
•
Subnet Mask: set up the subnet Mask according to your actual network environment.
•
Gateway: set up the correct gateway default gateway according to the IP address of
the default gateway.
•
Preferred&Alternate DNS Server: set up a preferred or alternate DNS Server (Domain
Name Server) according to your actual network environment. Preferred DNS server is
the primary DNS server address while the alternate DNS server is the secondary
server address and the door phone will connect to the alternate server when the
primary DNS server is unavailable.
10.1.2
Configuring Device Network Connection on the Web Interface
To check the network on the web Status > Network information interface.
To Next Page
Loading...
Need help?
General
