C319 Series Indoor Monitor Administrator Guide
•
Device Node: specify the device address by entering device location info from the
left to the right: Community, Unit, Stair, Floor, Room insequence.
•
Device extension: enter the device extension number for the device you installed.
•
Device Location: enter the location in which the device is installed and used.
10.3
Device NAT Setting
NAT (Network Address Translation) allows hosts in an organization's private intranet to
transparently connect to hosts in the public domain. There is no need for internal hosts to
have registered Internet addresses. It is a way to translate the internal private network IP
address into a legal network IP address technology. To set up NAT, you can do it on web
Account > Advanced > NAT interface.
Parameter Set-up:
•
RPort: check the RPort when the SIP server is in WAN (Wide Area Network).
10.4
Device Bluetooth Setting
10.4.1
Device Bluetooth Pairing
You need to enable the Bluetooth feature on the device before you can pair the indoor
monitor with other Bluetooth featured devices. You can go to Setting > Bluetooth screen.