C319 Series Indoor Monitor Administrator Guide
Note
•
Only the indoor monitor with camera module has this feature.
Call Feature >Audio Call Settings interface.
If it is enabled, calling parties can not see you when they want to have a two-way video call
with you. See the details below:
•
If an incoming call is received on an audio basis on the C319, then you can still see
the video image of the calling party, while the calling party cannot see yours. Thus it
protects your privacy.
•
If an incoming call is received on a video basis on the C319, then both of you and the
calling party can see each other in the two-way videocall.
11.10
Intercom Call Configuration (intercom preview, mute)
If you want to see the image at the door station before answering the incoming call, you
can enable the intercom preview function on web Device > Intercom > Intercom interface.
Parameter Set-up:
•
Intercom Active: tick the check box to enable or disable the intercom function. It is
enabled by default.
•
Intercom Mute: tick the check box to enable mute the voice from the callee side and
vice versa.
•
Intercom Preview: tick the check box to enable the incoming call preview function. If
intercom preview is enabled, the group call is not available.
To Next Page
Loading...
Need help?
General
