C319 Series Indoor Monitor Administrator Guide
Parameter Set-up:
•
Contact Sort By: select Default, then the local contacts will be displayed before the
contacts from SmartPlus and SDMC, etc. Select ASCII Code, then the contacts will be
displayed in the order based on the first letter of the contact names. Select Created
time, then the contacts will be displayed by their created time.
•
Show Local Contacts Only: if you enable it, then only the local contacts will be
displayed. If you disable it, then all the contacts from SmartPlus cloud and SDMC
and so on will be displayed.
9.2.3
Web Call
You make SIP calls or IP calls directly on the web interface. You can enter the contact's
SIP or IP number, then click Dial to make calls.