C319 Series Indoor Monitor Administrator Guide
Enable it to allow the fuzzy match
of the manager calls. For
example, if you have multiple
manager call contacts:
manager1, and manager2, then
you will be required to select the
specific manager call contact
when using Call manager voice
command.
To enable the voice assistant and set the voice assistant-controlled relay on the web
Settings > Voice Assistant > Voice Assistant Setting interface, you can tick the check box
to enable the voice assistant function. Then go to Voice Command Setting to elect a
specific relay to be triggered via voice assistant.
Parameter Set-up:
•
Unlock type: select the type of relay to be triggered by the voice assistant for the
predefined action, for example, door opening.