C319 Series Indoor Monitor Administrator Guide
6.2.1
Time Setting on the Device
To set up time setting on the device Settings > Time&Language screen.
Parameter Set-up:
•
Automatic Date Time: automatic date is switched on by default, which allows the
date& time to be automatically set up and synchronized with the default time zone
and the NTP server (Network Time Protocol). You can also set it up manually by
checking off the square box and then entering the time and date you want and
pressing the Save tab to save the setting.
•
Time Zone: select the specific time zone depending on where the device is used. The
default time zone is GMT+0:00.
•
Date Format: select the date format as you like among the three format options. The
three formal options are Y-M-D, Y/M/D, D-M-Y, D/M/Y, M-D-Y, and M/D/Y.
•
Time Format: select 12-hour or 24-hour time format as youlike.
•
NTP Server: enter the NTP server you obtained in the NTP server field.