C319 Series Indoor Monitor Administrator Guide
Parameter Set-up:
•
Auto Answer: turn on the Auto Answer function by ticking the squarebox.
•
Auto Answer Delay: set up the delay time (from 0-30 sec.) before the call can be
answered automatically. For example, if you set the delay time as 1 second, then the
call will be answered in 1 second automatically.
•
Answer Mode: set up the video or audio mode you preferred for answering the call
automatically.
•
Indoor Auto Answer: turn on the Auto Answer function for call from other indoor
monitors by ticking the check box.
11.9.2
Auto-answer Allow List setting
Auto answere can only apply to the SIP or IP numbers that are already added to the auto-
answer white-list of your indoor monitor. Therefore, you are required to configure or edit
the numbers in the white-list on the web Device > Call Feature > Auto Answer AllowList
interface.
To Next Page
Loading...
Need help?
General
