C319 Series Indoor Monitor Administrator Guide
Parameter Set-up:
•
Device Number: type in the monitored device number for identification
•
Device Name: type in the device name for identification.
•
RTSP Address: type in the RTSP address of the monitored device. RSTPformat:
Device IP address/live/ch00_0.
•
Username: type in the username of the monitored device for monitoring
authentication.
•
Password: type in the password of the monitored device for the monitoring
authentication.
•
Display In Call: enable it if you want to display the monitoring video when you are in
the call.
You can also set it up on the device: