Akuvox X933 Series User Manual

X933 Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
57
 SIP Port: enter the SIP server port for communication. The SIP port is
"5060" by default.
The parameter settings for SIP account registration can be configured on the
Account setting screen and they can also be configured on the device web
Account > Basic > SIP Account interface.
Parameter setup:
 Status: check to see if the SIP account is registered or not.
 Account: select Account1 or Account2.
 Account Enabled: check to active the registered SIP account.
 Display Label: configure the device label to be shown on the device
screen.
 Display Name: configure the name, for example, the device’s name to be
shown on the device being called to.

Akuvox X933 Series Specifications

General

Brand	Akuvox
Model	X933 Series
Category	Intercom System
Language	English