...................................................................................................................................................................................................
8
Measure the optical power being received at the OT VA, SVAC, or MVAC input port to
confirm power is present. If the alarm has not cleared, replace the OT VA port SFP
EVOA, MVAC port SFP EVOA, or SVAC card. Refer to “Replacing System
Components”
(p. 3-20).
If
the encoder is directly the line port of the OT:
1. Attempt a warm reset of the pack and wait to see if the problem clears.
• CLI:
config card
card type shelf slot
reset warm
• WebUI: Select the card, click the Reboot tab, select Warm Reboot >Submit.
2. Attempt a cold reset of the pack and wait to see if the problem clears.
• CLI:
config card
card type shelf slot
reset cold
• WebUI: Select the card, click the Reboot tab, select Cold Reboot >Submit.
3. Replace the OT card.
...................................................................................................................................................................................................
9
Follow the return and repair process in the Customer and Product Support guide to return
the faulty card to an authorized repair center for replacement.
OPTINTBASE
OPTINTBASE (Optical Intrusion Baseline Needed)
An optical intrusion baseline value other than the default (-1) is needed for proper optical
intrusion detection.
Severity MN
Service affecting? No
Applicability A2325A, ALPHG, AHPHG, AHPLG, ALPFGT, AM2017B,
AM2125A, AM2125B, AM2325B, OSCT
...................................................................................................................................................................................................
1
Note: Only a user with administrative-level privileges can perform this procedure.
In the WebUI, select the affected card in the Equipment Tree.
Trouble-clearing procedures
OPRUNACHIEVE
OPRUNACHIEVE (Channel Power Unachievable)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-244
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page
Loading...
