CARDINIT
CARDINIT (Card Initializing)
The card is in the process of initializing.
Severity Not reported
Service affecting? No
Applicability All cards
Corrective Action
This condition should clear by itself, or be replaced by another card alarm. No corrective
action is required.
The condition clears or is replaced by a card alarm. If the alarm does not clear, then
follow the procedure “CONTEQPT (Card Failure - Device)” (p. 2-54).
Note: T
o get correct PM counts after an MSC cold reboot, initialize the PM registers.
Trouble-clearing procedures CARDINIT (Card Initializing)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-50
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011