EasyManua.ls Logo

Alcatel-Lucent 1830 PSS-16 - Aprline

Alcatel-Lucent 1830 PSS-16
722 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1
Determine if there are any temperature alarms on the shelf. If so, check the airflow of the
shelf, filler card presence, and ambient air temperature. Resolve any air flow obstructions
or air-conditioner issues.
CLI alm
...................................................................................................................................................................................................
2
Perform a warm reset of the card.
CLI config card card type shelf slot reset warm
WEBUI Select the card, click the Reboot tab, select Warm Reboot >Submit.
...................................................................................................................................................................................................
3
Perform a cold reset of the card.
Note: Refer to Caution at the beginning of this procedure.
CLI config card card_type shelf slot reset cold
WEBUI Select the card, click the Reboot tab, select Cold Reboot >Submit.
...................................................................................................................................................................................................
4
Reseat the card. Refer to “Reseating a Card” (p. 3-19).
...................................................................................................................................................................................................
5
Replace the card. Refer to “Replacing System Components” (p. 3-20). Follow the return
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
APRLINE
APRLINE (APR Active - Line)
Trouble-clearing procedures
AMPDISABLED
AMPDISABLED (Amplifier Disabled)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-30
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
E ND OF STEPS
...................................................................................................................................................................................................

Table of Contents

Related product manuals