SWMTXMOD (Y-Cable Switchover Timer Expired)
Severity Critical
Service affecting? No
Applicability 11STAR1, 11STMM10, 11STGE12
Corrective Action
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1
Perform the steps in the procedure “EQPTDGR” (p. 2-75) for the standby card.
...................................................................................................................................................................................................
2
Perform the steps in the procedure “EQPTDGR” (p. 2-75) for the active card.
SWUPGCOMMIT
SWUPGCOMMIT (No committed software load (Autoinstall
disabled))
The SWUPGCOMMIT alarm is raised after the database has been manually cleared or
restored.
Severity Minor
Service affecting? No
Applicability SYSTEM
Trouble-clearing procedures
SWMTXMOD
SWMTXMOD (Y-Cable Switchover Timer Expired)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-310
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
E ND OF STEPS
...................................................................................................................................................................................................