Alcatel-Lucent 7705 SAR - Page 103

Security
7705 SAR OS System Management Guide 103
renum
Syntax renum old-entry-id new-entry-id
Context config>system>security>cpm-filter>ip-filter
config>system>security>cpm-filter>ipv6-filter
Description This command renumbers existing IP filter entries in order to resequence filter entries.
Resequencing may be required in some cases because the OS exits when the first match is found and
executes the actions according to the accompanying action command. This requires that entries be
sequenced correctly from most to least explicit.
Parameters old-entry-id — the entry number of an existing entry
Values 1 to 64
where: 1 to 29 are filter entries
30 to 64 are extended filter entries
new-entry-id — the new entry number to be assigned to the old entry
Values 1 to 64
where: 1 to 29 are filter entries
30 to 64 are extended filter entries