Security
7705 SAR OS System Management Guide 143
cpm-filter
Syntax cpm-filter ip-filter [entry entry-id]
cpm-filter ipv6-filter [entry entry-id]
Context show>system>security
Description This command displays information on CPM (CSM) filters.
If an entry number is not specified, all entries are displayed.
Parameters entry-id — displays information about the specified CPM filter entry
Values 1 to 9999
Default all filter entries
Output The following output is an example of CPM filter information, and Table 10 describes the fields.
Sample Output
A:ALU-35# show system security cpm-filter ip-filter
===============================================================================
CPM IP Filters
===============================================================================
Entry-Id Dropped Forwarded Description
-------------------------------------------------------------------------------
2 0 0 CPM filter #2
3 25880 0 CPM filter #3
4 25880 0 CPM filter #4
5 25882 0 CPM filter #5
Table 9: Show Communities Output Fields
Label Description
Community The community string name for SNMPv1 and SNMPv2c access only
Access r: The community string allows read-only access
rw: The community string allows read-write access
rwa: The community string allows read-write access
mgmt: The unique SNMP community string assigned to the
management router
View The view name
Version The SNMP version
Group Name The access group name
No of Communities The total number of configured community strings
To Next Page
Loading...
