Event and Accounting Logs
7705 SAR OS System Management Guide 291
Show Commands
accounting-policy
Syntax accounting-policy [acct-policy-id] access
Context show>log
Description This command displays accounting policy information.
Parameters acct-policy-id — the policy ID that uniquely identifies the accounting policy, expressed as a
decimal integer
Values 1 to 99
access — only displays access accounting policies
Output The following output is an example of accounting policy information, and Table 40 describes the
fields.
Sample Output
A:ALU-1# show log accounting-policy
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
1 access No Up Up 15 1 service-ingress-packets
2 access Yes Up Up 15 2 service-ingress-octets
==============================================================================
A:ALU-1#
A:ALU-1# show log accounting-policy 10
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
10 access Yes Up Up 5 3 service-ingress-packets
Description : (Not Specified)
This policy is applied to:
Svc Id: 100 SAP : 1/1/8:0 Collect-Stats
Svc Id: 101 SAP : 1/1/8:1 Collect-Stats
Svc Id: 102 SAP : 1/1/8:2 Collect-Stats
Svc Id: 106 SAP : 1/1/8:6 Collect-Stats
Svc Id: 107 SAP : 1/1/8:7 Collect-Stats
Svc Id: 108 SAP : 1/1/8:8 Collect-Stats