Event and Accounting Logs
7705 SAR OS System Management Guide 305
count — limits the number of log entries displayed to the number specified
Values 1 to 4294967295
Default all log entries
router-instance — specifies a router name up to 32 characters to be used in the display criteria
expression — specifies to use a regular expression as match criteria for the router instance string
subject — displays only log entries matching the specified text subject string. The subject is the 
object affected by the event; for example, the port-id would be the subject for a link-up or 
link-down event. 
regexp — specifies to use a regular expression as parameters with the specified subject string
ascending | descending — specifies the log sort direction. Logs are normally shown from the 
newest entry to the oldest in descending sequence number order on the screen. When using 
the ascending parameter, the log will be shown from the oldest to the newest entry.
Default Descending
Output The following output is an example of event log summary information, and Table 47 describes the 
fields.
Sample Output
A:ALU-1# show log log-id
=====================================================================
Event Logs
=====================================================================
Log Source Filter Admin Oper Logged Dropped Dest Dest Size
Id Id State State Type Id
--------------------------------------------------------------------
1 none none up down 52 0 file 10 N/A
2 C none up up 41 0 syslog 1 N/A
99 M none up up 2135 0 memory 500
=====================================================================
A:ALU-1#
Table 47: Log ID Output Fields 
Label Description
Log Id An event log destination
Source no: the event log filter is not currently in use by a log ID
yes: the event log filter is currently in use by a log ID
Filter ID The value is the index to the entry that defines the filter to be applied to 
this log's source event stream to limit the events output to this log's 
destination. If the value is 0, then all events in the source log are 
forwarded to the destination.