Alcatel-Lucent 7705 SAR - Configuring Profiles

Security Configuration Procedures
48 7705 SAR OS System Management Guide
authentication-order [method-1] [method-2]
[method-3] [exit-on-reject]
complexity [numeric] [special-character]
[mixed-case]
health-check
minimum-length value
The following displays an example of the password command usage.
Example: config>system>security#password
security>password# aging 365
security>password# minimum-length 8
security>password# attempts 5 time 5 lockout 20
security>password# authentication-order radius tacplus
local
The following example displays the password configuration:
ALU-1>config>system>security# info
----------------------------------------------
password
authentication-order radius tacplus local
aging 365
minimum-length 8
attempts 5 time 5 lockout 20
exit
----------------------------------------------
ALU-1>config>system>security#
Configuring Profiles
Profiles are used to deny or permit access to a hierarchical branch or specific commands.
Profiles are referenced in a user configuration. A maximum of 16 user profiles can be defined.
A user can participate in up to 16 profiles. Depending on the authorization requirements,
passwords are configured locally or on the RADIUS server.
Use the following CLI commands to configure user profiles:
CLI Syntax: config>system>security
profile user-profile-name
default-action {deny-all | permit-all | none}
renum old-entry-number new-entry-number
entry entry-id
description description-string
match command-string
action {permit | deny}