Alcatel-Lucent 7705 SAR - Table 7 Show System Security Access Group Output Fields

Security
7705 SAR OS System Management Guide 139
Security Show Commands
access-group
Syntax access-group [group-name]
Context show>system>security
Description This command displays SNMP access group information.
Parameters group-name — displays information for the specified access group
Output The following output is an example of system security access group information, and Table 7 describes
the fields.
Sample Output
A:ALU-4# show system security access-group
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
snmp-ro snmpv2c none no-security no-security
snmp-rw snmpv1 none no-security no-security no-security
snmp-rw snmpv2c none no-security no-security no-security
snmp-rwa snmpv1 none iso iso iso
snmp-rwa snmpv2c none iso iso iso
snmp-trap snmpv1 none iso
snmp-trap snmpv2c none iso
===============================================================================
A:ALU-7#
Table 7: Show System Security Access Group Output Fields
Label Description
Group name The access group name
Security model The security model required to access the views configured in this node
Security level Specifies the required authentication and privacy levels to access the views
configured in this node
Read view Specifies the variable of the view to read the MIB objects
Write view Specifies the variable of the view to configure the contents of the agent
Notify view Specifies the variable of the view to send a trap about MIB objects