Event and Accounting Logs
7705 SAR OS System Management Guide 275
Parameters eq | neq | lt | lte | gt | gte — this operator specifies the type of match. Valid operators are listed in
Table 35.
severity-level — the ITU severity level number. Table 36 lists severity levels and corresponding
numbers per ITU standards M.3100 X.733 & X.21 severity levels.
subject
Syntax subject {eq | neq} subject [regexp]
no subject
Context config>log>filter>entry>match
Description This command adds an event subject as a match criterion.
The subject is the entity for which the event is reported, such as a port. In this case, the port-id string
would be the subject.
Table 35: Valid Operators for Event Severity
Operator Notes
eq Equal to
neq Not equal to
lt Less than
lte Less than or equal to
gt Greater than
gte Greater than or equal to
Table 36: Severity Levels
Severity Number Severity Level
1 cleared
2 indeterminate (info)
3 critical
4major
5 minor
6warning