Alcatel-Lucent 7705 SAR - Configuring Login Controls

Security
7705 SAR OS System Management Guide 55
The following example displays the SSH server configuration as both SSH1 and SSH2 using
a host-key:
A:ALU-1>config>system>security>ssh# info
----------------------------------------------
preserve-key
version 1-2
----------------------------------------------
A:ALU-1>config>system>security>ssh#
Configuring Login Controls
Use the login-control context to configure parameters for console, Telnet, and FTP
sessions.
CLI Syntax: config>system
login-control
exponential-backoff
ftp
inbound-max-sessions value
telnet
inbound-max-sessions value
outbound-max-sessions value
idle-timeout {minutes | disable}
pre-login-message login-text-string [name]
login-banner
motd {url url-prefix:source-url | text motd-
text-string}
The following example displays the login control configuration:
Example: config>system>login-control# ftp inbound-max-sessions 5
config>system>login-control# telnet inbound-max-sessions
7
config>system>login-control# telnet outbound-max-
sessions 2
config>system>login-control# idle-timeout 1440
config>system>login-control# pre-login-message "Property
of Service Routing Inc. Unauthorized access
prohibited."
config>system>login-control# motd text "Notice to all
users: Software upgrade scheduled 3/2 1:00 AM"