Log Command Reference
262 7705 SAR OS System Management Guide
Table 31 lists the accounting record names available and the default collection interval.
to file
Syntax to file file-id
Context config>log>accounting-policy
Description This command specifies the destination for the accounting records selected for the accounting policy.
Default No destination is specified.
Parameters file-id — the file-id option specifies the destination for the accounting records associated with this
accounting policy. The characteristics of the file ID, such as rollover and retention intervals,
must have already been defined in the config>log>file-id context. A file ID can only be used
once.
The file is generated when the file ID is referenced. This command identifies the type of
accounting file to be created. If the to command is executed while the accounting policy is in
operation, then it becomes active during the next collection interval.
Values 1 to 99
Table 31: Accounting Record Names
Record Type Accounting Record Name Default Interval
1 service-ingress-octets 5 minutes
2 service-egress-octets 5 minutes
3 service-ingress-packets 5 minutes
4 service-egress-packets 5 minutes
To Next Page
Loading...
