Alcatel-Lucent 7705 SAR - Configuring a File ID

Common Configuration Tasks
232 7705 SAR OS System Management Guide
The following displays an example of the log file configuration command syntax:
Example: config# log
config>log# log-id 2
config>log>log-id$ description "This is a test log file."
config>log>log-id# filter 1
config>log>log-id# from main security
config>log>log-id# to file 1
config>log>log-id# no shutdown
config>log>log-id# exit
The following displays a log file configuration:
ALU-12>config>log>log-id# info
----------------------------------------------
...
log-id 2
description "This is a test log file."
filter 1
from main security
to file 1
exit
...
----------------------------------------------
ALU-12>config>log>log-id#
Configuring a File ID
To create a log file, a file ID is defined that specifies the target compact flash drive and the
rollover and retention interval period for the file. The rollover interval is defined in minutes
and determines how long a file will be used before it is closed and a new log file is created.
The retention interval determines how long the file will be stored on the compact flash drive
before it is deleted.
Use the following CLI syntax to configure a log file ID:
CLI Syntax: config>log
file-id log-file-id
description description-string
location cflash-id
rollover minutes [retention hours]