Event and Accounting Logs
7705 SAR OS System Management Guide 303
Table 46: Log Collector Output Fields
Label Description
<Collector Name> Main: the main event stream contains the events that are not explicitly
directed to any other event stream
Security: the security stream contains all events that affect attempts to
breach system security, such as failed login attempts, attempts to access
MIB tables to which the user is not granted access or attempts to enter a
branch of the CLI to which access has not been granted
Change: the change event stream contains all events that directly affect
the configuration or operation of this node
Debug: the debug-trace stream contains all messages in the debug stream
Dest. Log ID Specifies the event log stream destination
Filter ID The value is the index to the entry that defines the filter to be applied to
this log's source event stream to limit the events output to this log's
destination. If the value is 0, then all events in the source log are
forwarded to the destination.
Status Enabled: logging is enabled
Disabled: logging is disabled
Dest. Type: Console: a log created with the console type destination displays events
to the physical console device
Events are displayed to the console screen whether a user is logged in to
the console or not.
A user logged in to the console device or connected to the CLI via a
remote telnet or SSH session can also create a log with a destination type
of 'session'. Events are displayed to the session device until the user logs
off. When the user logs off, the 'session' type log is deleted.
Syslog: all selected log events are sent to the syslog address
SNMP traps: events defined as SNMP traps are sent to the configured
SNMP trap destinations and are logged in NOTIFICATION-LOG-MIB
tables
File: all selected log events are directed to a file on the CSM’s compact
flash disk
Memory: all selected log events are directed to an in-memory storage area
To Next Page
Loading...
