EasyManua.ls Logo

Alcatel-Lucent 7705 SAR - Table 8 Show System Security Authentication Output Fields

Alcatel-Lucent 7705 SAR
356 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Security
7705 SAR OS System Management Guide 141
tacplus admin status : down
health check : enabled (interval 30)
-------------------------------------------------------------------------------
No. of Servers: 4
===============================================================================
Login Statistics
===============================================================================
server address conn accepted rejected
errors logins logins
-------------------------------------------------------------------------------
10.10.10.103 0 0 0
10.10.0.1 0 0 0
10.10.0.2 0 0 0
10.10.0.9 0 0 0
local n/a 1 0
===============================================================================
Authorization Statistics (TACACS+)
===============================================================================
server address conn sent rejected
errors pkts pkts
-------------------------------------------------------------------------------
10.10.0.9 0 0 0
===============================================================================
Accounting Statistics
===============================================================================
server address conn sent rejected
errors pkts pkts
-------------------------------------------------------------------------------
10.10.10.103 0 0 0
10.10.0.1 0 0 0
10.10.0.2 0 0 0
===============================================================================
A:ALU-7#
Table 8: Show System Security Authentication Output Fields
Label Description
Sequence The sequence in which authentication is processed
Server address The IP address of the RADIUS server
Status The current status of the RADIUS server
Type The authentication type
Timeout (secs) The number of seconds the router waits for a response from a RADIUS
server
Single connection Enabled: Specifies a single connection to the TACACS+ server and
validates everything via that connection
Disabled: The TACACS+ protocol operation is disabled

Table of Contents

Related product manuals