Security
7705 SAR OS System Management Guide 151
Sample Output
A:ALU-1# show system security source-address
===============================================================================
Source-Address applications
===============================================================================
Application IP address/Interface Name Oper status
-------------------------------------------------------------------------------
telnet 10.20.1.7 Up
radius loopback1 Up
===============================================================================
A:ALU-1#
ssh
Syntax ssh
Context show>system>security
Description This command displays all the SSH sessions as well as the SSH status and fingerprint.
Output The following outputs are examples of SSH information (IPv4 and IPv6), and Table 15 describes the
fields.
Sample Output (IPv4)
ALU-7# show system security ssh
SSH is enabled
SSH preserve key: Enabled
SSH protocol version 1: Enabled
RSA host key finger print:c6:a9:57:cb:ee:ec:df:33:1a:cd:d2:ef:3f:b5:46:34
SSH protocol version 2: Enabled
DSA host key fingerprint:c0:be:4a:da:55:87:e0:92:da:33:b8:55:fb:42:71:58
RSA host key fingerprint:79:28:68:61:d8:8b:c0:f0:5c:f5:bc:0b:fa:02:24:d8
=======================================================
Connection Username Version
=======================================================
192.168.xxx.xxx admin 1-2
-------------------------------------------------------
Table 14: Show Source Address Output Fields
Label Description
Application The source-address application
IP address: Interface
Name
The source address IP address or interface name
Oper status Up: The source address is operationally up
Down: The source address is operationally down
To Next Page
Loading...
