Event and Accounting Logs
7705 SAR OS System Management Guide 261
Only one access accounting policy ID can be designated as the default access policy.
The record name must be specified prior to assigning an accounting policy as default.
If a policy is configured as the default policy, then a no default command must be issued before a new
default policy can be configured.
The no form of the command removes the default policy designation from the policy ID. The
accounting policy will be removed from all SAPs that do not have this policy explicitly defined.
record
Syntax [no] record record-name
Context config>log>accounting-policy
Description This command adds the accounting record type to the accounting policy to be forwarded to the
configured accounting file. Each accounting policy can only contain one record name. To obtain a list
of all record types that can be configured, use the show log accounting-records command.
ALU-12>config>log# show log accounting-records
==========================================================
Accounting Policy Records
==========================================================
Record # Record Name Def. Interval
----------------------------------------------------------
1 service-ingress-octets 5
2 service-egress-octets 5
3 service-ingress-packets 5
4 service-egress-packets 5
==========================================================
ALU-12>config>log#
To configure an accounting policy for access ports, select a service record (for example, service-
ingress-octets). To change the record name to another service record, re-enter the record command
with the new record name and it will replace the old record name.
Only one record may be configured in a single accounting policy.
The no form of the command removes the record type from the policy.
Default No accounting record is defined.
Parameters record-name — the accounting record name
Note: Collecting excessive statistics can adversely affect the CPU usage and take up large
amounts of storage space.
To Next Page
Loading...
