Security Command Reference
114 7705 SAR OS System Management Guide
access
Syntax [no] access [ftp] [snmp] [console]
[no] access [ftp] [console]
Context config>system>security>user
config>system>security>user-template
Description This command grants a user permission for FTP, SNMP, or console access.
If a user requires access to more than one application, then multiple applications can be specified in a
single command. Multiple commands are treated sequentially.
The no form of the command removes access for a specific application.
The no access command denies permission for all management access methods. To deny a single
access method, enter the no form of the command followed by the method to be denied; for example,
no access ftp denies FTP access.
Default no access
Parameters ftp — specifies FTP permission
snmp — specifies SNMP permission. This keyword is only configurable in the
config>system>security>user context.
console — specifies console access (serial port or Telnet) permission
console
Syntax console
Context config>system>security>user
config>system>security>user-template
Description This command creates the context to configure user profile membership for the console.
To Next Page
Loading...
