Alcatel-Lucent 7705 SAR - Page 118

Security Command Reference
118 7705 SAR OS System Management Guide
If a password is entered without any parameters, a password length of zero is implied (return
key).
hash — specifies that the given password is already hashed using hashing algorithm version 1. A
semantic check is performed on the given password field to verify that it is a valid hash1 key
to store in the database.
hash2 — specifies that the given password is already hashed using hashing algorithm version 2.
A semantic check is performed on the given password field to verify that it is a valid hash2
key to store in the database.
restricted-to-home
Syntax [no] restricted-to-home
Context config>system>security>user
config>system>security>user-template
Description This command prevents users from navigating above their home directories for file access. A user is
not allowed to navigate to a directory higher in the directory tree on the home directory device. The
user is allowed to create and access subdirectories below their home directory.
If a home directory is not configured or the home directory is not available, then the user has no file
access.
The no form of the command allows the user access to navigate to directories above their home
directory.
Default no restricted-to-home
snmp
Syntax snmp
Context config>system>security>user
Description This command creates the context to configure SNMP group membership for a specific user and
defines encryption and authentication parameters.
All SNMPv3 users must be configured with the commands available in this CLI context.
The 7705 SAR always uses the configured SNMPv3 user name as the security user name.