Security
7705 SAR OS System Management Guide 135
Default 3
Parameters value — the maximum number of concurrent FTP sessions on the node
Values 0 to 5
idle-timeout
Syntax idle-timeout {minutes | disable}
no idle-timeout
Context config>system>login-control
Description This command configures the idle timeout for FTP, console, or Telnet sessions before the session is
terminated by the system.
By default, an idle FTP, console, or Telnet session times out after 30 minutes of inactivity. This timer
can be set per session.
The no form of the command reverts to the default value.
Default 30
Parameters minutes — the idle timeout in minutes
Values 1 to 1440
disable — when the disable option is specified, a session will never time out. To re-enable idle
timeout, enter the command without the disable option.
login-banner
Syntax [no] login-banner
Context config>system>login-control
Description This command enables or disables the display of a login banner. The login banner contains the
7705 SAR copyright and build date information for a console login attempt.
The no form of the command causes only the configured pre-login-message and a generic login
prompt to display.
To Next Page
Loading...
